MPI Approved Guide Formulas List

MPI #   252      High Performance Institutional, Two-Component, Water Based Coating, Flat (MPI GL 1-2)
Note: Requires a properly-prepared Level 4 drywall finish (i.e. Assuming no critical lighting conditions). See "Standard Specification for Application and Finishing of Gypsum Board – ASTM C 840". A white or colored waterborne two-component, epoxy or polyurethane intended for use on new or previously painted interior surfaces. The coating is intended for use in hospitals or institutional buildings where exposure to bacteria, moderate abrasion, strong stains, incidental chemical contact or where strong cleansers are used.
[See MPI 'Detailed Performance' Specs for complete details, specific requirements, and/or reference specs.]

MPI VOC Ranges (grams/L) E3   <11 g/l E2   g/l E1   g/l > E '0' - outside range, n/a - unavailable
EPR - Environmental/Performance Rating (VOC & Relative Performance of Category+Gloss & Appropriate Specified Use). meets GPS-1,   meets MPI GPS-2 for Standard Category: Interior Architectural Flat Intermediate/Top Coats
Supplier Formula Description Code Brand(s)/Tradenames Formula / Link Chemical Family
E Range
Bayer MaterialScience Bayhydrol® HD Wall Coating NB 995433 Bayhydrol® HD 2016 and HD 2017, Bayhydur® HD 2018 ../Bayerinfo2.asp 2 K Waterborne Polyurethane
E 3