MPI Approved Products List
Product Index
By MPI Number
MPI #   133      Dry Fall, Water Based, for Galvanized Steel, Flat (MPI Gloss Level 1)
A water based coating, designed for direct application to cleaned, interior galvanized metal ceiling surfaces and adjacent primed metals. Overspray will dry to a sweepable powder over a short distance for easier clean up. Specified for use in non-chemical and in non-humid environments such as warehouses.  Minimum recommended surface preparation for galvanized surfaces is a solvent cleaning and test for chromate passivation, with an SSPC SP 7 Brush-off blast cleaning if required.  It is recommended that smooth, spangle galvanized metals receive a SSPC SP 7 cleaning.  Application methods include: airless and/or conventional spray equipment. Note: Chemical-etching cleaners such as MPI # 25 may be substituted for solvent washing and SSPC-SP 7 cleaning. (Gloss @ 60°: 5 units maximum).
[See MPI 'Evaluated Performance' Specs for complete details, specific requirements, and/or reference specs.]
MPI VOC Ranges (grams/L) E3   <51 g/l E2   51 - 100 g/l E1   101 - 150 g/l E '0' - outside range, n/a - unavailable
EPR - Environmental/Performance Rating (VOC & Relative Performance of Category+Gloss & Appropriate Specified Use). meets GPS-1,   meets MPI GPS-2 for Standard Category: Interior Architectural Flat Intermediate/Top Coats   meets RG (OTC or EC)    meets LEED (excluding LEED for schools)
Listing Mfr Label Product Name Code
EPR
GPS-1
GPS-2
Akzo Nobel (Canada) Glidden Spraymaster Unigrip Interior Waterborne Dryfall Flat 10113
E 3
3
Cloverdale Paint Cloverdale Latex Acrylic Fall Flat 05138
E 3
3
Coronado Paint Coronado Industrial DTM Acrylic Flat Dey Fall 128-1
E 0
0
Diamond Vogel Luminance 300 Latex Dri-Mist Flat MV-1518
E 3
3
General Paint Premium Latex Flat White Dryfall 52-026
E 3
3
The PaintInfo website and contents are copyright ©1996- Master Painters Institute Inc. All Rights Reserved.