previous
| MPI # 77 Epoxy, Gloss | ||||
| A solvent based, gloss, two component, epoxy coating specified for wall and floor surfaces in moderate to heavy traffic commercial and moderate industrial environments. Must be resistant to incidental splash and spillage of dilute (5%) sulfuric acid, (15%) hydrochloric acid, (20%) sodium hydroxide, gasoline and heavy duty cleaners and detergents. Used as a self-priming material on smooth, low porosity concrete, masonry and wood surfaces. On concrete masonry units (blocks) MPI #4 Latex (dry areas) or #116 Epoxy (damp areas) block fillers are used as the first coat. On ferrous and galvanized metals, a primer such as MPI #20 Epoxy Zinc Rich, #101 Epoxy Anti-Corrosive and #19 Inorganic Zinc rich primers. On non-ferrous metals MPI #80 Etch Type Primer is specified. This epoxy shall be able to be applied at temperatures ranging from 15° to 40° C and a maximum relative humidity of 80%. Application is generally by spray, but in areas where spray is impractical, a brush or roller may be used. | ||||
| [Characteristics reviewed include total solids and gloss levels of minimum 70 units @ 60°. See MPI 'Detailed Performance' Specs for complete details, specific requirements, and/or reference specs.] | ||||
| MPI VOC Ranges (grams/L) | E3 <251 g/l | E2 251 - 420 g/l | E1 421 - 500 g/l | E '0' - outside range, n/a - unavailable |
 meets GPS-1-08 for Standard Category: Industrial Maintenance Coatings |
||||
MPI Approved Products List
| Listing Mfr | Label | Product Name | Code |
E Range
|
GPS-1
|
|---|---|---|---|---|---|
| Benjamin Moore | Super Spec HP | Polyamide Epoxy/Gloss Catalyst | P36/KP36 |
E
2
|
|
| Carboline Korea Ltd. | Carboline | Carboline 298 Gloss | 298 |
E
1
|
|
| Cloverdale Paint | Hi Performance | Clovacoat 300 | 83300 |
E
2
|
|
| Comex Group | Comex Industrial Coatings | High Gloss Epoxy Coating | E-50 |
E
2
|
|
| Insl-X | Corotech | Polyamide Epoxy | V400 |
E
2
|
|
| KCC Corporation | KCC Corporation | Epoxy Cold Cured Gloss | MP077 |
E
1
|
|
| PPG | Aquapon 35 | Aquapon 35 Polyamide Epoxy Gloss | 95-1/95-98 |
E
2
|
|
| Sherwin-Williams | Industrial | Tile-Clad HS Epoxy | B62WZ111/B60VZ90 |
E
2
|
|
| Sherwin-Williams | Industrial & Marine | Tile-Clad HS Epoxy | B62WZ111/B60VZ70 |
E
2
|