MPI Approved Products List

Index Alphabetical - List Updated

MPI #   116      Block Filler, Epoxy
A solvent based, two component, epoxy, high solids coating for unfilled, interior and exterior block surfaces that are to be coated with a chemically resistant finish. Resistant to water, alkalis, chemicals and solvents. Specified in areas of high humidity, such as public showers, pools and washrooms. Primarily used with MPI #77 Cold Cure Epoxy, #98 High Build Epoxy and #115 water based Epoxy finish coatings. Application is predominantly by roller or brush.
MPI Intended Use
MPI VOC Ranges (grams/L) E3   g/l E2   g/l E1   g/l E '0' - outside range, n/a - unavailable
meets GPS-1 for Standard Category: Primers, Sealers & Undercoaters   meets RG (OTC or EC)    meets LEED 2009 (excluding LEED for schools)

Listing Mfr Label Product Name Code
Benjamin Moore Corotech Epoxy Mastic Coating V160
E 2
Cloverdale Paint High Performance Epoxy Block Filler 83065
E 1
Hempel A/S STRATA EPOXY BLOCK FILLER 116 Strata Epoxy Block Filler 116 35BME
E 2
PPG Architectural Protective and Marine Coatings Amerlock 400 BF AK400B-x
E 2
Sherwin-Williams Protective & Marine Kem Cati-Coat HS Epoxy Filler/Sealer B42W00400/B42V00401
E 2