|
|||||||
A solvent based, gloss, two component, epoxy coating specified for wall and floor surfaces in moderate to heavy traffic commercial and moderate industrial environments. Must be resistant to incidental splash and spillage of dilute (5%) sulfuric acid, (15%) hydrochloric acid, (20%) sodium hydroxide, gasoline and heavy duty cleaners and detergents. Used as a self-priming material on smooth, low porosity concrete, masonry and wood surfaces. On concrete masonry units (blocks) MPI #4 Latex (dry areas) or #116 Epoxy (damp areas) block fillers are used as the first coat. On ferrous and galvanized metals, a primer such as MPI #20 Epoxy Zinc Rich, #101 Epoxy Anti-Corrosive and #19 Inorganic Zinc rich primers. On non-ferrous metals MPI #80 Etch Type Primer is specified. This epoxy shall be able to be applied at temperatures ranging from 15° to 40° C and a maximum relative humidity of 80%. Application is generally by spray, but in areas where spray is impractical, a brush or roller may be used. | |||||||
[Characteristics reviewed include total solids and gloss levels of minimum 70 units @ 60°. See MPI 'Detailed Performance' Specs for complete details, specific requirements, and/or reference specs.] | |||||||
MPI VOC Ranges (grams/L) | E3 <251 g/l | E2 251 - 420 g/l | E1 421 - 500 g/l | E '0' - outside range, n/a - unavailable | |||
![]() ![]() ![]() |

MPI Approved Products List
Index Alphabetical - List Updated
Listing Mfr | Label | Product Name | Code |
GPS-1 |
|||
---|---|---|---|---|---|---|---|
Al-Jazeera Factory | Al-Jazeera Epoxy Finish | Al-Jazeera Epoxy Finish | JI-68004 |
E
1
|
|||
Cloverdale Paint | High Performance | ClovaCoat 300 Epoxy High Gloss White | 83300 |
E
2
|
![]() |
![]() |
|
Fosam Co.Ltd.–Saudi Fosroc | Nitroflor FC140 | Nitroflor FC140 |
E
3
|
![]() |
|||
Hempel A/S | STRATA EPOXY LT | Strata Epoxy LT Base / Cure | 451M9 / 951ME |
E
2
|
|||
Jotun U.A.E. | Jotafloor Topcoat | Jotafloor Topcoat | 502 |
E
1
|
|||
KCC Corporation | KOREPOX TOPCOAT ET574 | KOREPOX TOPCOAT ET574 | AE5017M |
E
1
|
|||
Noroo Paint & Coatings | NOROO | Cleanpoxy 3100 | NA |
E
2
|
|||
Samhwa Paint | Samhwa Paint | MPI 77 Superpoxy 200 | 3200126 |
E
1
|
|||
Sherwin Williams de C.A. | Kem Cati Coat Enamel | Esmalte Industrial Epoxico Kem Cati Coat Brilliante Blanco | B69W36K |
E
1
|
|||
Sherwin-Williams | Protective & Marine | Tile-Clad HS Epoxy | B62WZ111/B60VZ70 |
E
2
|