MPI Approved Products List

Index Alphabetical - List Updated




MPI #   77      Epoxy, Gloss
A solvent based, gloss, two component, epoxy coating specified for wall and floor surfaces in moderate to heavy traffic commercial and moderate industrial environments. Must be resistant to incidental splash and spillage of dilute (5%) sulfuric acid, (15%) hydrochloric acid, (20%) sodium hydroxide, gasoline and heavy duty cleaners and detergents. Used as a self-priming material on smooth, low porosity concrete, masonry and wood surfaces. On concrete masonry units (blocks) MPI #4 Latex (dry areas) or #116 Epoxy (damp areas) block fillers are used as the first coat. On ferrous and galvanized metals, a primer such as MPI #20 Epoxy Zinc Rich, #101 Epoxy Anti-Corrosive and #19 Inorganic Zinc rich primers. On non-ferrous metals MPI #80 Etch Type Primer is specified. This epoxy shall be able to be applied at temperatures ranging from 15 to 40 C and a maximum relative humidity of 80%. Application is generally by spray, but in areas where spray is impractical, a brush or roller may be used.
MPI Detailed Performance
MPI VOC Ranges (grams/L) E3   g/l E2   g/l E1   g/l E '0' - outside range, n/a - unavailable
meets GPS-1 for Standard Category: Industrial Maintenance Coatings   meets RG (OTC or EC)    meets LEED 2009 (excluding LEED for schools)

Listing Mfr Label Product Name Code
GPS-1
Al-Jazeera Factory Al-Jazeera Epoxy Finish Al-Jazeera Epoxy Finish JI-68004
E 1
Cloverdale Paint High Performance ClovaCoat 300 Epoxy High Gloss White 83300
E 2
Jotun U.A.E. Jotafloor Topcoat Jotafloor Topcoat 502
E 1
KCC Corporation KOREPOX TOPCOAT ET574 KOREPOX TOPCOAT ET574 AE5017M
E 1
Noroo Paint & Coatings MPI 77 Cleanpoxy 3100 NA
E 2
Noroo Paint & Coatings NOROO Cleanpoxy 3100 NA
E 2
Samhwa Paint Samhwa Paint MPI 77 Superpoxy 200 3200126
E 1
Sherwin Williams de C.A. Kem Cati Coat Enamel Esmalte Industrial Epoxico Kem Cati Coat Brilliante Blanco B69W36K
E 1
Sherwin-Williams Protective & Marine Tile-Clad HS Epoxy B62WZ111/B60VZ70
E 2