MPI Approved Products List
Index Alphabetical - List Updated

MPI #   128      Varnish, Water Based, Clear, Satin
A water based clear coating for interior wood trim, frames, doors, paneling and cabinetry. Used in residential, commercial and institutional locations or where solvent fumes from conventional varnishes pose a health or safety problem. These coatings shall be “self sealing” on new or bare hardwood and softwood surfaces. Primary application methods include: airless, HVLP and/or conventional spray; may also be applied by roller or brush.
[Characteristics reviewed include gloss levels of 20 — 35 units . See MPI 'Detailed Performance' Specs for complete details, specific requirements, and/or reference specs.]
MPI Detailed Performance
MPI VOC Ranges (grams/L) E3   <101 g/l E2   101 - 150 g/l E1   151 - 250 g/l E '0' - outside range, n/a - unavailable
EPR - Environmental/Performance Rating (VOC & Relative Performance of Category+Gloss & Appropriate Specified Use). meets GPS-1,   meets MPI GPS-2 for Standard Category: Clear Varnishes   meets RG (OTC or EC)    meets LEED 2009 (excluding LEED for schools)

Listing Mfr Label Product Name Code
Benjamin Moore Lenmar Aqua Plastic Waterborne Clear Satin 1WB-1427
E 0
Cloverdale Paint Timberlox Waterborne Alkyd Varnish Satin 59314
E 3
PPG Architectural Deft Interior Polyurethane Water-Based Acrylic Satin DFT159 / DFT159C
E 0
Sherwin-Williams Minwax Polycrylic Protective Finish Satin 3333
E 0