MPI Approved Products List
Index Alphabetical - List Updated




MPI #   133      Dry Fall, Water Based, for Galvanized Steel, Flat (MPI Gloss Level 1)
A water based coating, designed for direct application to cleaned, interior galvanized metal ceiling surfaces and adjacent primed metals. Overspray will dry to a sweepable powder over a short distance for easier clean up. Specified for use in non-chemical and in non-humid environments such as warehouses.  Minimum recommended surface preparation for galvanized surfaces is a solvent cleaning and test for chromate passivation, with an SSPC SP 7 Brush-off blast cleaning if required.  It is recommended that smooth, spangle galvanized metals receive a SSPC SP 7 cleaning.  Application methods include: airless and/or conventional spray equipment. Note: Chemical-etching cleaners such as MPI # 25 may be substituted for solvent washing and SSPC-SP 7 cleaning. (Gloss @ 60: 5 units maximum).
[See MPI 'Evaluated Performance' Specs for complete details, specific requirements, and/or reference specs.]
MPI Evaluated Performance
MPI VOC Ranges (grams/L) E3   <51 g/l E2   51 - 100 g/l E1   101 - 150 g/l E '0' - outside range, n/a - unavailable
EPR - Environmental/Performance Rating (VOC & Relative Performance of Category+Gloss & Appropriate Specified Use). meets GPS-1,   meets MPI GPS-2 for Standard Category: Interior Architectural Flat Intermediate/Top Coats   meets RG (OTC or EC)    meets LEED 2009 (excluding LEED for schools)

Listing Mfr Label Product Name Code
EPR
GPS-1
GPS-2
Behr Paint BEHR Pro Dryfall 890
E 3
3
Cloverdale Paint Cloverdale Latex Acrylic Fall Flat 05138
E 3
3
Diamond Vogel Luminance 300 Latex Dri-Mist Flat MV-1518
E 3
3
PPG Architectural Glidden Spraymaster (CA) Interior DTM Latex Dryfall Flat 10112
E 3
3
PPG Architectural Glidden Spraymaster (CA) Unigrip Interior Waterborne Dryfall Flat 10113
E 3
3
PPG Architectural Sico (CA) Expert Interior Latex Dryfall Flat 871-140
E 3
3