MPI Approved Products List
Index Alphabetical - List Updated

MPI #   177      Epoxy, Semi-Gloss (MPI Gloss Level 5)
A solvent based, semi-gloss, two component, epoxy coating specified for wall and floor surfaces in moderate to heavy traffic commercial and moderate industrial environments. Must be resistant to incidental splash and spillage of dilute (5%) sulfuric acid, (15%) hydrochloric acid, (20%) sodium hydroxide, gasoline and heavy duty cleaners and detergents. Used as a self-priming material on smooth, low porosity concrete, masonry and wood surfaces. On concrete masonry units (blocks) MPI #4 Latex (dry areas) or #116 Epoxy (damp areas) block fillers are used as the first coat. On ferrous and galvanized metals, a primer such as MPI #20 Epoxy Zinc Rich, #101 Epoxy Anti-Corrosive and #19 Inorganic Zinc rich primers. On non-ferrous metals MPI #80 Etch Type Primer is specified. This epoxy shall be able to be applied at temperatures ranging from 15 to 40 C and a maximum relative humidity of 80%. Application is generally by spray, but in areas where spray is impractical, a brush or roller may be used.
[Characteristics reviewed include total solids and gloss levels of 35 70 units @ 60. See MPI 'Detailed Performance' Specs for complete details, specific requirements, and/or reference specs.]
MPI Detailed Performance
MPI VOC Ranges (grams/L) E3   <251 g/l E2   251-420 g/l E1   421-500 g/l E '0' - outside range, n/a - unavailable

Listing Mfr Label Product Name Code
Benjamin Moore Corotech Polyamide Epoxy Semi-Gloss V400-91
E 2
Cloverdale Paint High Performance ClovaCoat 330 High Build Semi-Gloss Epoxy White 8333 Series
E 2
Sherwin-Williams Protective & Marine Macropoxy 646 Fast Cure Epoxy B58W00610
E 3